Technoline WT 482, Instruction Manual

Page: 14 / 66

6. Press
SET
again or if no key pressed for approx. 10 seconds to exit the setting mode.
Note: when 12-hour time format is selected, the
PM
LED will appear on the lower middle time display
to indicate the afternoon time; there is no AM indicator.
SETTING THE ALARMS
1. Press
AL 1.2 / ON.OFF
once, the
A1
LED and the hour digits flash. Press or to set the
Alarm 1 ’s hours. (hold to advance rapidly).
2. Press
AL 1.2/ ON.OFF
again to adjust minutes. Press or to set the Alarm 1 ’s minutes.
(hold to advance rapidly).
3. Press
AL 1.2/ ON.OFF
again, LED displays “
OFF
” (alarm off). To select wake to sound
sources, press or to select :-
rd
= wake-by-radio
bu
= wake-by-buzzer
OFF
= alarm off
4.
Press
AL 1.2/ ON.OFF
again, the
A2
LED and the hour digits flash. Press or to set the
Alarm 2 ’s hours. Repeat step 2 and 3 above to set alarm 2.
5. Press
AL 1.2/ ON.OFF
again or no button around 10 seconds to exit alarm setting mode.
When wake-by-radio or wake-by-buzzer is selected, the related alarm is turned on, indicated
by appearance of the
A1
and / or the
A2
LED on the left side of the display.
Note: Alarm function just operates at AC mode only.
STOPPING AND RESETTING THE ALARM TO COME ON THE NEXT
DAY
When alarm 1 or 2 is sounding, the related
A1 or A2
LED flashes. Press the
RADIO/ SLEEP
or
AL
1.2/ ON.OFF
once to stop the alarm and reset it to come on the following day. After that
A1
or
A2
icon keep lighting up on the display.
SNOOZE OPERATION (default snooze duration is 5 minutes)
When alarm is sounding, press once, the alarm will be silenced and come on again after
the set snooze duration.
Note: if your second alarm activates while the first alarm is sounding or it is in the snooze mode, the
second alarm overrides the first alarm (the first alarm is reset to come on the next day).
USING THE HI-LO DIMMER
Press to adjust the brightness (LO / HI ) of the LED display. This can only be done when
the radio is off.