EN.3
INSTALLATION
Plug in the AC/DC adaptor and then plug the DC jack to the lower left back of the unit. Your unit is
ready to work for you.
DC BATTERY INSTALLATION
Your clock requires 3 x new AAA batteries (not included) to provide backup power to it in the event of
a temporary power interruption.
1. Place your unit face down on a flat surface.
2. Remove the battery cover at the back of your unit.
3. Insert 3 x new AAA batteries into the battery compartment by observing the correct “+” and “-
“ polarity.
4. Replace the battery cover.
At DC battery mode, the unit can work normally except project function. The DC battery will keep the
time and all settings of your unit. Make sure new AAA batteries are used.
DCF SIGNAL RECEPTION AND SIGNAL INDICATOR
After your clock is powered up, it starts to receive DCF signal. The
icon flashes.
Weak or no DCF signal
(only icon flashing)
Receiving strong DCF signal
(
icon flashing)
Successful Reception
(
icon becomes static)
Failed Reception
(
icon disappear)
Remark: when your clock is receiving radio controlled time signal, all buttons except the
SNOOZE /
DIMMER
button do not function.
DCF TIME SIGNAL RECEPTION
Your clock will automatically update itself to the exact time after receipt of the DCF time code. The
clock starts automatic reception everyday at 1:00, 2:00, and 3:00. If it fails to receive the DCF signal
at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it fails again, it will
start automatic reception at 1:00 again in the next day.
To start DCF reception manually, press
WAVE
button for 3 seconds. To stop DCF reception,
press and hold
WAVE
for 3 seconds.
TO SET TIME, 12/24 HR TIME AND SNOOZE DURATION
1. Press and hold
SET
,
24hr
flash, press
or
to select
24hr
12hr.
In 12-hour mode,
PM
will
appear on the display to indicate afternoon time. There is no
AM
indicator.
2. Press
SET
once again, the time digits change to “
00
”. Press
or
to set the time zone.
-01 GMT 00 hour (e.g. UK)
00 GMT + 1 hour (e.g. Germany)
01 GMT + 2 hour (e.g. Finland)
3. Press
SET
once again, the hour digits flash. Press
or
to set the hours. Press and hold
or
will accelerate setting in fast speed.
