Technogel MIXGEL 30, Instructions For Installation, Use And Maintenance Manual, Page: 37 / 73

C:\Users\jamie\AppData\Local\Temp\notes97E53A\~3769474.doc
37
Cleaning the lid and control console

Cleaning the transparent lid
The lid of t he past eurizat ion t ank should be w ashed w it h hot or cold w at er t oget her w it h liquid,
not pow der det ergent . Kit chen det ergent in pow der f orm could scrat ch it .
When removing st ubborn crust s, do not use brushes or abrasive metal pads . Sof t en t he crust s
by soaking w it h hot w at er and remov e w it h a sponge or sof t clot h.
Under no circumstances should you use Alcohol, Acids or Solvents of any kind.

Cleaning the control console
The blue f ilm on t he console must be cleaned using a sponge soaked in hot or cold w at er and
liquid det ergent . An abrasive soap pow der could ruin t he f ilm, scrat ching it and removing t he
colour.
Never use acids or solvents of any kind whatsoever; they would damage the film.
Do not use metal or rigid plastic brushes or abrasive metal pads of the kind normally used in the
kitchen.
In attempting to remove stubborn dirt, do not under any circumstances use blades or
metal tools (knives
– scissors – screwdrivers – etc.
) as these could cut the film.
Soak and soften with hot water and remove with a sponge or soft cloth.