3-5
TABLE 3-1 OPERATORS SWITCHES, CONTROLS AND INDICATORS (Continued)
FIG
3-1
No.
SWITCHES
CONTROLS &
INDICATORS
FUNCTIONAL DESCRIPTION
24
BAT TEST
Single pole pushbutton switch provides for manual battery charge level
test. Results are indicated by the Batt Low LED indicator or BATT
charged LED indicator.
25
BAT LOW LED
INDICATOR
A RED LED Indicates that battery charge is less than 21.6 Vdc and that
battery should be charged before using in battery mode.
26
BAT CHARGED
LED INDICATOR
A GREEN LED Indicates that battery is charged to greater than 21.8
Vdc and is ready for use in battery mode.
27
15W/7W RF
POWER
SWITCH
Selects 7 Watt or 15 Watt Transmit Operation.
28
15 W RF
POWER
LED INDICATOR
An AMBER LED indicates that 15 Watt RF Power output has been
selected and transceiver is operating in transmit mode. The LED is
driven by sampled RF and indicates that RF is present.
29
*AC POWER
CONNECTOR
3 Prong AC Connector for use with AC Power Cord P/N 927002-1.
30
*REMOTE
CONTROL
CONNECTOR
9 Pin "D" type connector provides connections required for remote
operation. Refer to Table 2-1 for connector details.
31
*BATTERY
TEST POINTS
Two Jacks are provided for exact measurement of internal battery
voltage (Output Impedance is 20 K
S
).
32
*EXTERNAL DC
CONNECTOR
Chassis mounted connector provides for Connection to External DC
Supply Source. Mates with DC power cable P/N 863701-1.
* Denotes items located on rear panel.
Summary of Contents for TiL-91-DE/S
