3-12
NOTE
Entry of 117 MHz fills 975 in remaining digits.
Entry of 138 Mhz fills 000 in remaining digits.
4th Digit - Can be any digit.
5th + 6th Digits are paired.
Entry of 5th digit 0 results in 00 displayed.
Entry of 2 results in 25.
Entry of 5 results in 50.
Entry of 7 results in 75.
Examples:
+),
+),
+),
Press
*
1
*
*
1
*
*
7
*
.)-
.)-
.)-
117.975 is displayed on screen.
+),
+),
+),
+),
+),
Press
*
1
*
*
1
*
*
8
*
*
0
*
*
0
*
.)-
.)-
.)-
.)-
.)-
118.000 is displayed on screen.
+),
+),
+),
Press
*
1
*
*
3
*
*
8
*
.)-
.)-
.)-
138.000 is displayed on screen.
After keypad entry of a desired frequency, normal Tx/Rx operation can begin as described in
paragraph 3.3 or the frequency can be stored as a channel as described in paragraph 3.4.2.
3.4.5 Storing a Frequency to a Channel
Up to 10 Frequencies can be stored and recalled in channels 0 to 9 as follows:
1.
Enter the frequency to be stored as described in paragraph 3.4.1 followed immediately
by pressing "E" and the desired Channel number "#".
NOTE
"E","#" must be pressed within 5 seconds of entry or
frequency will not be stored.
Examples:
+),
+),
+),
+),
+),
Press
*
1
*
*
1
*
*
7
*
*
E
*
*
0
*
.)-
.)-
.)-
.)-
.)-
Frequency 117.975 MHz is stored as channel 0.
Summary of Contents for TiL-91-DE/S
