73
DL input
Sensor values from DL bus sensors are transferred via a DL input.
Up to 32 DL inputs can be programmed.
Example:
Programming the parameters of DL input 1
Select:
Analogue or digital
DL bus address and DL bus index
Every DL sensor must have its own DL bus address. Setting the address of a DL sensor is described
in the sensor's datasheet.
Most DL sensors can measure various different values (e.g. flow rate and temperatures). Every value
measured must be given its own index number. The applicable index number can be found in the DL
sensor's datasheet.
Summary of Contents for CAN-EZ2
Page 5: ......
Page 62: ...62 Messages This menu item displays activated messages Example A message is active...
Page 98: ......
Page 99: ......
