Programming with TAPPS2 / CAN bus
32
CAN digital outputs
Up to 32 CAN digital outputs can be programmed. They are defined by specifying the
source
in the
bus converter.
Their parameters are programmed in exactly the same way as for the CAN analogue outputs except
for the transmission conditions.
Designation
Every CAN digital output can be given its own designation. The designation can be selected from
various designation groups or can be user defined.
Transmission condition
Example:
If change yes/no
Transmission of the value if a status change occurs
Blocking
time
00:10
[mm:ss]
If the value changes within 10 seconds of the last transmission, the value
is nevertheless only transmitted again after 10 seconds.
(Minimum value: 1 sec)
Interval time 5 min
The value is transmitted every 5 minutes even if it has not changed since
the last transmission.
(Minimum value: 1 minute)
