36
37
11 Please read first
Before connecting and commissioning the device, first check the delivery for
completeness and read the safety instructions.
The scope of delivery for the TERRABOX T3 includes:
1x DVB-T2 receiver,
1x operating manual,
1x remote control with MEMORY function
11.1 Purpose of the device
Digital receiver TERRABOX T3 is used for receiving digital terrestrial broadcast
channels. It is designed exclusively for this purpose. Observe all information contained
in this manual, especially the safety instructions. Any other use is considered
inappropriate and may result in property damage or even personal injury. TechniSat
Digital cannot be held liable for damage caused by misuse.
11.2 Safety instructions
For your protection, please read the safety precautions carefully before operating
your new device. The manufacturer is not liable for damage caused by improper
handling or failure to observe the safety precautions.
Electrical equipment may experience leakage currents due to their function.
These are permissible and harmless, even if they may be perceived as a slight
"tingling". To avoid these leakage currents, new installation or connection of
mains-powered equipment (receiver, TV, etc.) must always be carried out in a de-
energized state, i.e. all equipment must be disconnected from the mains..
-
The device can only be used in moderate climates.
-
To ensure proper ventilation, place the unit on a smooth, level surface and do
not place any objects on the cover of the unit. The ventilation slots through
which heat escapes from the interior must be uncovered.
-
Do not place any burning objects, such as lighted candles, on top of the unit.
-
Do not expose the unit to dripping or splashing and do not place objects filled
with liquids, such as vases, on the unit. If water enters the unit, unplug the unit
immediately and contact the service shop.
-
Do not use any heat sources near the device that will additionally heat it up.
-
Do not insert any objects through the ventilation slots.
-
Never open the device! There is a risk of electric shock. Any necessary
intervention should only be carried out by trained personnel.
In the following cases, unplug the unit from the mains and ask a specialist for
assistance:
>
The power cable or plug is damaged
>
The unit has been exposed to moisture or liquid has penetrated into it.
>
In case of serious malfunctions
>
In case of serious external damage
Napięcie elektryczne!
Istnieje możliwość porażenia prądem elektrycznym.
Nigdy nie należy otwierać urządzenia lub zasilacza sieciowego!
Protection Class II - Protection Class II electrical equipment is electrical
equipment that has continuous double and/or reinforced insulation and
no protective conductor connection. The enclosure of an insulated Class II
electrical device may partially or completely provide additional or reinforced
insulation.
All of the following instructions must be observed for proper use of the device and to
prevent defects.
-
The unit should only be operated in moderate climates.
-
To ensure sufficient ventilation, place the unit on a smooth, level surface and
do not place any objects on the cover of the unit. Do not cover any ventilation
slots that may be present.
-
Do not place any burning objects, such as lighted candles, on top of the unit.