TechniSat SKYRIDER 65, Instruction Manual

Page: 42 / 172

42
11 Description of the SKYRIDER 65
11.1 Introduction
This manual describes the functions, installation and operation of the SKYRIDER 65 mobile satellite antenna system.
Correct and safe operation of the system can only be guaranteed by observing this manual.
Your antenna is a smart satellite TV reception system that can automatically align with the default satellites.
For general operation, ensure that the system always has a clear and unobstructed view of the desired satellite. If the satellite
signal is interrupted by obstacles such as mountains, buildings, vehicles or trees, no satellite reception or only weak satellite
reception is possible.
11.2 Scope of delivery
The scope of delivery includes:
Satellite antenna
1 x SKYRIDER alignment unit with base plate, 1x 65cm mirror, 1x LNB arm, 1x cable clamp, 1x protective sticker,
1 x M6x55 screw, 2 x M6x15 screw, 2 x M6x25 screw, 4 x washer, 6 x 4x16 screw, 1 x 4x10 screw
Controller
1 x controller, 1 x controller holder, 1 x cable cover, 1 x remote control, 1 x instruction manual, 4 x 4x16 screws
Cables
1 x power supply cable, 1 x signal cable (twin LNB version 2 x), 1 x STB cable, 1 x cable holder, 1 x cable screw connection,
3 x 4x16 screws
11.3 Special features of the SKYRIDER 65
The SKYRIDER 65 is a satellite reception system for camping use and has the following features:
- self-alignment
- 1 LNB connection for control and satellite signal reception
- 1 LNB connection with satellite signal for 2nd STB or 2nd connection to STB (only twin LNB version)