TechniSat SKYRIDER 65, Instruction Manual

Page: 44 / 172

44
11.4.2 Installing the satellite system
In addition to the components from the scope of delivery, to mount the satellite system requires:
1 x suitable mounting / sealing adhesive, 1 x cleaning agent, 1 x 2mm drill, 1 x 25mm drill, 1 x adhesive tape, 1 x screwdriver,
1 x 13mm wrench, flexible tape
>
Determine a suitable location for the installation of the satellite system as per 4.4.1.
Be sure to pay attention to any installations that possibly exist on, in and under the vehicle roof.
> Release and remove the 4 nuts connecting the alignment unit to the base plate and remove the alignment unit from the
base plate.
> Clean the roof surface according to the surface preparation specifications of the selected mounting adhesive.
> Place the base plate in the previously determined position.
Pay attention to the direction of travel indicated on the base plate.
> Lay a strip of the adhesive tape around the base plate at a distance of approx. 5mm.