When connecting / disconnecting all cables, grasp the connector itself—never pull on the
cable. This way you will avoid causing shorts, or damage to the cable’s internal elements.
Do not excessively twist or bend the power cord, or place heavy objects on it. Doing so can
damage the cord, producing severed elements and short circuits. Damaged cords are fire and
shock hazards!
In households with small children, an adult should provide supervision which is essential for
the safe operation of any electrical appliances in the home.
All cords and cables should be placed so they are out of the reach of children.
Try to prevent cords and cables from becoming entangled.
Before moving the unit, disconnect the power cable from the mains supply and any cords
coming from external devices.
Never handle an AC adaptor or electrical plugs with wet hands when plugging into, or
unplugging from, an outlet or this unit.
Before cleaning the unit, turn off the power and unplug the AC adaptor from the outlet.
Do not force the unit’s power-supply cord to share an outlet with an unreasonable number of
other devices.
Be especially careful when using extension cords—the total power used by all devices you
have connected to the extension cord’s outlet must never exceed the power rating
(watts/amperes) for the extension cord. Excessive loads can cause the insulation on the cord
to heat up and eventually melt through.
Protect the unit from strong impact.(Do not drop it!)
Before using the unit in a foreign country, consult with your retailer or an authorized
distributor.
Whenever you suspect the possibility of lightning in your area, disconnect the unit from the
power outlet.
Do not attempt to repair the unit, or replace parts within it. Refer all servicing to your retailer
or an authorized distributor.
When moved from one location to another where the temperature and/or humidity is very
different, water droplets (condensation) may form inside the unit. Damage or malfunction may
result if you attempt to use the unit in this condition. Therefore, before using the unit, you
must allow it to stand for several hours, until the condensation has completely evaporated.
---- ALWAYS OBSERVE THE FOLLOWING ----
Safety Advice
26
