Humidity Calibration Mode
Advanced Settings & Calibration modes
Fan
Heater
Temp
R/h
Htr
Min
Max
Fan
Power
Evolution
Humidity
Temperature
Digital Fan Speed Controller
DOWN
UP
1.Press and hold
“R/h”
button down
then power up the controller.
2.Once powered up the controller will display
- - - - - - release the
“R/h”
button at this point
3.The display will show - - - in the left LED
and the current humidity reading in the
right LED .Using the up and down buttons
(
htr
and
temp
) you can calibrate the
humidity by lowering or raising the setting.
4.To store the new setting simply press the
min/max
button.
5. To exit advanced mode power simply down
and then power back up the controller again
to resume the normal mode of the controller.
Fan
Heater
Temp
R/h
Htr
Min
Max
Fan
Power
Evolution
Humidity
Temperature
Digital Fan Speed Controller
DOWN
UP
Fan
Heater
Temp
R/h
Htr
Min
Max
Fan
Power
Evolution
Humidity
Temperature
Digital Fan Speed Controller
DOWN
UP
Fan
Heater
Temp
R/h
Htr
Min
Max
Fan
Power
Evolution
Humidity
Temperature
Digital Fan Speed Controller
DOWN
UP
1
2
3
4
hold down
R/h
then power
on the
controller
you can now adjust the
humidity to match your
calibration using the
button to lower &
button to raise
the humidity
setting
htr
temp
release
once the
display
shows - - - - - -
press the
button to
store your new setting
min/max
20
