3
2 - PRESENTATION
2.1 - DESCRIPTION
7
1
2
3
4
8
5
10
9
6
1 - Sound-proofed hermetic compressor.
2 - Water exchanger with stainless steel plates.
3 - Water outlet connector.
4 - Water inlet connector.
5 - Hole for connecting cables.
6 - Electrical box.
7 - Fan motor.
8 - "Plate-Fin" air heat exchanger.
9 - Microprocessor control unit display keyboard.
10 - Fan protection plastic grille.
Materials:
- Copper piping.
- Painted sheet metal cabinet.
- Copper/aluminium exchanger.
- Plastic grille.
2.2 - DIMENSIONS AND WEIGHT
PMERV 5
70
Weight (kg)
1 030
305
130
620
325
835
1
2
3
280
80
140
285
1.2 - RECOMMANDATIONS
• Prior to all servicing or other actions on the equipment, installation, commissioning, operation, or maintenance, the personnel
in charge of these operations shall become familiar with the instructions and recommendations provided in the installation manual
of the unit as well as the elements of the project's technical file.
• The personnel responsible for receiving the unit must conduct a visual inspection in order to identify all damage to which the unit
may have been subjected during transport: refrigerating circuit, electrical cabinet, cassis and cabinet.
• The unit must be installed, started, maintained and repaired by qualified servicing personnel in compliance with the requirements
of all directives, laws and regulations and in accordance with standard trade practices.
• During installation, troubleshooting and maintenance operations, the use of pipes as a step: under the stress, the pipe may
rupture and the refrigerant may cause serious burns.
1.3 - VOLTAGE
• Before carrying out any operation, check that the voltage indicated on the unit corresponds to the mains voltage.
1.4 - USE OF EQUIPMENT
• This heat pump is designed for heating/cooling floor type installations.
1.5 - OPERATING CONDITIONS
• Refer to the nominal conditions and operating limitations in the technical manual.
1
Connection 3/4" (male)
- water outlet
2
Connection 3/4" (male)
- water inlet
3
Holes for electric cables
