8
GB
5 - USING THE CONTROL BOARD
SWITCH
• This is for selecting the unit's functions.
• Turn the knob to the position the pointer on the required function.
See symbols on diagram :
-
Symbol 1
: OFF
-
Symbol 2
: Cooling function at low ventilation speed.
-
Symbol 3
: Cooling function at medium ventilation speed.
-
Symbol 4
: Cooling function at high ventilation speed.
-
Symbol 5
: Ventilation function only at low speed.
-
Symbol 6
: Ventilation function only at medium speed.
-
Symbol 7
: Heating function at low ventilation speed.
-
Symbol 8
: Heating function at medium ventilation speed.
THERMOSTAT :
• Set the required temperature by rotating the
thermostat knob. Turn the knob to the blue
area for lower temperatures and to the red
area for higher temperatures.
NOTE :
When the required temperature is reached,
only the ventilation continues to operate.
0
1
2
3
4
5
7
6
8
SWITCH
THERMOSTAT
6 - MAINTENANCE AND CLEANING
IMPORTANT
•
For safety reasons : switch off the air conditioner and disconnect from the mains before starting cleaning (see § 1).
•
Do not pour water onto the appliance to clean it. This could damage the internal components and cause electrical
discharges.
FRAME AND GRILLE
• Clean the frame and the grille of the appliance with a vacuum cleaner brush or with a soft, clean cloth
.
If these parts are dirty, clean them with a clean cloth moistened with a mild liquid detergent.
PRECAUTIONS
•
Never use solvents or powerful chemicals. Do not clean with very hot water.
•
Some metal edges and the fins on the heat exchanger are sharp and must be handled carefully during cleaning to
prevent injury.
Summary of Contents for AOF 15
Page 2: ...2 F GB D...
Page 15: ...15 F GB D...
