technetix AIMA3000-FT5E, Product User Manual

Page: 19 / 28

17
Oct/2017 - V1 Technetix Group Limited
Product User Manual
AIMA-FT5E
Item Description
'BC Input Power' /
'NC Input Power' /
'RF Composite Input Power' / 'Laser
Temperature' /
'Laser Bias Current' /
'Laser Output Power'
Select or unselect parameters to determine alarm settings and levels. The settings for alarm threshold values
and blind spots can be selected.
See Table 5-2 for the default settings for each parameter.
'Submit' Saves changes to settings.
Item Description
'Auto Download'
Automatic downloading of the latest FT5E configuration files from the ASMM module to the
FT5E module.
'Auto Upload' Automatic uploading of the FT5E’s current configuration files to the ASMM module’s database.
'Manual'
Manual setting of all parameters in the module configuration interface and module port configuration interface
(for details, see Chapters 5.1.1 and 5.1.2).
Table 5-2 FT5E default port alarm settings
5.1.3 Automatically Uploading/Downloading Module Config Files
Select 'Modules' on the AIMA3000 configuration system interface. Select 'All Modules' in the module list on the left side, as
shown in Figure 5-3.
Find the FT5E module in the [Module Type] in the white section on the right side. Details about the current configuration of
the FT5E can be accessed by clicking on [See Details]. Synchronisation of configuration files with the ASMM module can
be set in the [Hotswap Mode]:
Parameter Unit HiHi Hi Lo LoLo Blind
BC Input Power dBmV 53. √ 48.8 √ 23.8 √ 18.8 √ 1.0
NC Input Power dBmV 63 58.8 23.8 18.8 1.0
RF Composite Input Power dBmV 59 √ 57 √ 47 45 1.0
Laser Temperature °C 60 √ 40 √ 15 √ –15 √ 0.5
Laser Bias Current mA 15 √ 120 √ 20 √ 15 √ 0.2
Laser Optical Output Power dBm 16 √ 13 √ 7 √ 4 √ 0.5
Note:
'√' When the parameter value in the selected check box exceeds the threshold value, the corresponding level alarm is triggered. When the
value is between Hi and Lo threshold values, the alarm status is normal (no alarm). The secondary alarm is triggered if the Hi (Lo) threshold
value is exceeded. The main alarm is triggered if the HiHi (LoLo) threshold value is exceeded.