11
Oct/2017 - V1
Technetix Group Limited
Product User Manual
AIMA-FT5E
To obtain a good quality optical input signal, optical fibre input ports and fibre connector ends must be carefully cleaned.
Head
Connection terminal
When cleaning the optical fibre-connector end, remove the dust cap and then use a lint-free cloth dampened with a static
dissipative solvent to clean the angled surface. Dry the surface using a dry lint-free cloth.
To clean the front-panel optical port, use a special lint-free swab that is designed for this purpose. Dampen it with a static
dissipative solvent. Apply slight pressure to the internal angled surface of the optical port, while rotating the swab
90 degrees back and forth. You may need to remove excess solvent using a dry lint-free swab. Alternatively, a cleaning
pen such as the one click cleaner can be used. Always inspect the fibre-end interfaces using an appropriate scope to
validate that the surfaces are adequately clean, free from damage, and dry from any solvents prior to connection.
Figure 4-1 The fibre connector ends
SC one click cleaning pen
www.oneclickcleaner.com
Summary of Contents for AIMA3000-FT5E
Page 28: ......
