technetix AIMA3000-FT5E, Product User Manual

Page: 16 / 28

14
Oct/2017 - V1 Technetix Group Limited
Product User Manual
AIMA-FT5E
Module details (read-only); the displayed items and button functions are as follows:
Alarm settings; parameters and button functions are as follows:
Module Management; push button functions are as follows:
Configuration; parameter descriptions and button functions are as follows:
Item Description
'Module Information' Model, serial No, HW Assembly No, FW Part No, FW Version.
'Refresh' Refreshes the web GUI.
Item Description
'Temperature'/ '+12V Input Voltage'/
'+5V Input Voltage'/ '-5V Input
Voltage' Select or unselect parameters to determine alarm settings and levels. However, the user cannot change the
alarm threshold values and blind spot settings.
See Table 5-1 for the default settings for each parameter.
'Submit' Saves changes to setting.
Item Description
'Factory Defaults'
When the 'Apply' button is pressed, all FT5E settings are cleared and restored to default. After this process is
completed, the module is automatically rebooted.
'Reboot' Reboots the module. This action requires approximately 20 seconds.
Item Description
'Alarm Control'
'Enable' - enables the alarm monitoring function; an alarm is triggered only when a malfunction occurs. The
indicator lights on the module alarm status interface (Chapter 5.2.1, Figure 5-4) change in accordance with the
actual situation.
'Disable' - disables the alarm monitoring function; the alarm status will remain as it was before
being disabled and will not change.
'Tx Unit Control'
'On' - enables individual optical output for all port lasers (default);
'Off' - disables optical output for all port lasers.
'Module Alias'
Sets module names; after confirming, the module name will be updated in the corresponding FT5E slot in the list
on the left side of the interface.
'Submit' Saves changes to settings.