39
Aug/2017 - V1
Technetix Group Limited
Product User Manual
AIMA-OPSW
7 Troubleshooting
Indicator for determining faults
If there is a problem, the operator can use the status LEDs to determine the location and conditions of the error.
Please see
Table 7-1
below:
Table 7-1 Fault Judgment Table
Alarm Indicator status
Common Faults
Trouble Shooting
OPT IN A/OPT IN B status is red
Optical input A/B is too low or high.
Adjust input signal to an appropriate value.
STAT red
Input A/B signal is too high or too low.
Adjust input signal to an appropriate value.
The RF output power is too high or too low.
Please contact Technetix's technical support
Power Failure
Please contact Technetix's technical support
Operating environment temperature is too high.
Lower the room temperature. If the
temperature is normal, please contact
Technetix's technical support.
Summary of Contents for AIMA-OPSW
Page 47: ......
