technetix AIMA-OPSW, Product User Manual

Page: 16 / 47

13
Aug/2017 - V1 Technetix Group Limited
Product User Manual
AIMA-OPSW
5 Installation
5.1 Preparatory Work for Installation
Before installing this device, you must ensure that the unit is intact and ready for installation.
Unpack and check the unit: Open the box to check for any damage that may have occurred during shipment.
If damage is found, please contact a Technetix customer support representative.
Necessary equipment and tools for installation:
Table 5-1 Necessary equipment and tools for installation
Tools/Modules Description
Phillips screwdriver PH1/PH2 For use with the AIMA3000 chassis
FT5X module The module to install into the AIMA3000 chassis
No. Description Qty
1 OPSW module 1
2 Product User Manual (CD) 1
3 Individual test sheet (Certificate of Performance) 1
5.2 Installation Steps
To install the module follow the instructions below:
1. Unpack the device
2. Install the module
3. Connect the fiber optic tail of the optical input to the first and second optical connectors of front panel
to test the two optical inpit signals
4. Connect the optical output signal to a fiber optic tail
5.3 Unpacking
Unpack the module. Keep the packaging materials for future transport needs.
Check the package manifest, record the product module type, serial number, purchase date, and any other relevant
information to facilitate later management and maintenance.
Table 5-2 Package Manifest