19
Aug/2017 - V1
Technetix Group Limited
Product User Manual
AIMA-OPSW
5.4.4 Cleaning the Fibre Connector Ends and the Front-panel Optical Ports
To obtain a good quality optical input signal, optical fi bre input ports and fi bre connector ends must be carefully cleaned.
When cleaning the optical fi bre-connector end, remove the dust cap and then use a lint-free cloth dampened with a static
dissipative solvent to clean the angled surface. Dry the surface using a dry lint-free cloth.
To clean the front-panel optical port, use a special lint-free swab that is designed for this purpose. Dampen it with a static
dissipative solvent. Apply slight pressure to the internal angled surface of the optical port, while rotating the swab 90
degrees back and forth. You may need to remove excess solvent using a dry lint-free swab. Alternatively, a cleaning pen
such as the one click cleaner can be used.
SC one click cleaning pen
www.oneclickcleaner.com
Head face
Connection terminal
Figure 5-1
Summary of Contents for AIMA-OPSW
Page 47: ......
