4
11. Press “Next” the device will be configured. After the TX-55 is set up, press “Finish” to
complete. The Ready LED turns off and reboots the camera. Status LED flashing in
Red within 10 sec. Then both the Ready and Status LED are on. If the configuration
couldn’t finish press “Retry” or start the configuration again. The camera is ready for
monitoring from your mobile device when camera is online.
12. Press “Finish”
Android configuration steps:
1. Press the Add Camera icon from the APP to add camera.
2. Press the WiFi Setup.
3. Select the WiFi network. Press scan to find different WiFi network in your surroundings.
Default WiFi network is set as the network your Smartphone is connected with.
4. Press “Next”.
5. Enter the WiFi password of the router. You have selected.
6. Press “Next
