Recording video
1. Turn on the device, press the mode button (7) to switch to video mode.
2. Zooming:
Keep pressing the
or
button (3 / 4) to zoom in or zoom out the
image. The value of magnification level appears on the LCD screen.
3. Start to record video.
- View your subject via the LCD screen.
- Press the shot button (5) to start to record. The record duration will be
shown on the LCD screen.
4. Finish recording.
- Press the shot button again to stop recording.
- The device will stop recording automatically once capacity of the
memory card is full.
Note:
If you are too close or too far from the target, the quality of the
photos or videos will not be optimal. Rotate the lens to the left or the
right to focus the observation object.
There is no sound in the video
files. Because the observation distance is far, the sound cannot be
transmitted.
IR
–
LED (Night vision function)
In photo/video mode, if you have to view the darkness environment,
please short press IR UP button to activate the IR LED, the image will
change to black and white. The IR LED have seven levels, short press IR
UP button to up the level, short press IR DOWN button to down the level.
Note:
If the battery voltage is not enough, the IR LED level will down
automatically. IR level can up to 7 levels when the battery power is full.
If only left half power, the level just can up to 5. If only left 25% power,
the level just can up to 3. If the battery power is lower than 25%, IR
LED cannot be activated.
