35
3.5.1
Signal Reception Verification
Precondition:
a.
For tuner input test:
satellite signal is ready and strong.
b.
For ASI input test:
ASI signal source equipment can stream out ASI signal.
The configuration of IRD:
The items need to be checked are listed in the following table.
Items
Method
Modify the signal reception
mode
(Front panel modification)
Inputs -> Source select menu
(Through the front panel to select from ASI or Tuner
which matches your current input signal).
Modify the signal reception
mode
(Modification
through
WEB)
Login WEB UI to select correct input source in
“Inputs->Source Select” configuration page.
(Refer to
Figure 3.4
of this manual)
Signal Connection
Make sure the signal is well connected to the right
interfaces:
1. Whether the RF signal is connected to the
tuner input.
2. Whether the ASI source is connected ASI
Input.
3. Whether the device has been connected to
management network through the device
“Management” port.
Verification Result
Once the signal source is properly connected and the parameters based on the input is
accurately configured, front panel LOCK indicator will lights up in GREEN, indicating that the
signal reception is normal.
3.5.2
Descrambling Function Verification
Precondition:
a.
Scrambled satellite signal or test stream are available.
