36
b.
The smart card has already been authorized.
c.
Corresponding CAM for the test signal/stream is available.
d.
The descrambled picture can be seen via monitors.
The configuration of the device:
The items need to be checked are listed in the following table.
Items
Method
Front Panel Modification
Outputs->Program Setup menu
(Select the program which needs to be descrambled
from Program List. Select CI Slot1or CI Slot2 according
to which CI ports the CAM module and CAM Card is
inserted.)
Modification through WEB
Select “Outputs->Program Setup” page
(Refer to Figure 3.4 of this manual)
Verification Result
If the scrambled programs can be seen on the monitor after descrambling setting, then it
verifies the IRD descrambling function works well.
3.5.3
Decoding Function Verification
Precondition:
a. The input signal is available and well fed to the input ports.
b. The scrambled satellite signal and code streams are dealt with correct CAM
module and authorized smart card.
c.
The descrambled picture can be seen via the monitor.
The configuration of IRD:
The items need to be checked are listed in the following table.
Items
Method
Front Panel Modification
Outputs->Program Setup menu (for scrambled
program)
(Select the program which needs to be descrambled
from Program List. Select CI Slot1or CI Slot2
according to which CI ports the CAM module and
CAM Card is inserted.)
