31
which is entered as a “session key”. This session key is then mathematically
combined internally to calculate a BISS-1 key that can decrypt the signal.
o
BISS-E ID,
an identification ID given prior to transmission and reception.
Usually a standard CAM can support Max. 72Mbit data processing unless it
has instruction for higher bit rate support. Selecting a wrong CAM output bit rate will
cause video mosaic issue because the actual processed data exceeds the CAM Max
handling capability.
3.4.2.8 System
Local Setting
PIC-3.4- 22
In this page, you can do factory set and reboot, and able to configure the following
parameters:
IP Address:
Local IP setting for connecting to the server. This IP and the
management
server’s IP should be in the same section.
Subnet Mask:
Subnet Mask setting for connecting to the server. It should be
the same as management server: 255.255.255.0
Gateway:
Gateway setting for connecting to the server. It should be the same
as the management server.
Trap IP Address1:
This IP should be the same as the monitoring serve
r’s IP.
After correct setup, the IRD will pass the alarming and running information to
the monitoring server.
