HDMI EXTENDER MATRIX
13
EN
8. specIFIcatIon
Power supply
DC5V/1A
Support input resolution
480i@60Hz, 480p@60Hz, 576i@50Hz,
576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz.
1080p@50/60Hz
Support output resolution
480p@60Hz, 576p@50Hz, 720p@50/60Hz,
1080p@50/60Hz
Network cable
UPT/STP cat5e/6
Network cable length between all connections
CAT5E: ≤100m CAT6: ≤120m
Lan switch
Support network management function and
IGMP/IGMP snooping. Support local area
network bandwidth ≥100M
IR remote control device
Support 20—60KHz carrier frequency IR signal
Power consumption
Send: 3W Receive: 3W
Dimension
LxWxH: 13x8.5x2.4(cm)
7. rFQ
Q1:
TV is black screen and OSD displays “ searching TX” on top left corner?
A1:
Check TX, LAN switch and network cable connection and make sure all of them are powered on.
Q2:
TV is black screen and OSD displays“lP:><xx.xx><.x><x is not my group”?
A2:
Check if the RX and TX display the same IGMP group value.
Q3:
TV is black screen and OSD dispIays“Check TX‘s input signal“?
A3:
Check ifthe TX has HDMI signal input. Change HDMI cable to retest.
Q4:
The Lan port yellow indicate led does not light?
A4:
Check the network cable quality and connection.
Q5:
Video is stuck and unstable?
A5:
Check if TX to LAN switch and LAN switch to RX network cable are too long
Q6:
Network matrix can not output image normally?
A6:
1) Check ifTX and RX IP/MAC address are repeated.
2) Check if Lan switch IGMP function is enabled.
Q7:
Multiple RXs receive same IGMP source, RXs can not output audio synchronously?
A7:
Restart Lan switch or IGMP source TX to make all RXs receive signal synchronously.
Q8:
Have already modified IP address and need to modify again, but forget the modified IP address
and unable to enter into products network management page?
A8:
Press the system reset button for 5s(the small hole beside of HDMI port) and can restore IP and
MAC to default factory setting.
Summary of Contents for IDATA HDMI-MX373
Page 2: ...HDMI EXTENDER MAT ...
Page 15: ...HDMI EXTENDER MATRIX ...
Page 16: ...www techly com ...
