Techly IDATA HDMI-MX373, User Manual, Page: 12 / 16

Setting procedure as below:
1 Set PC’s IP network segment the same with TX/RX’s [P segment, like 192.168.168.100.
Take win7 for example:
In this control page, users can change “lP address”and “MAC address”only. And please note, all
the RX and TX in the same network matrix must be in the same network segment, the IP and MAC
addresses for these RX and TX must be different.
4 The TX MAC address (00:0b:7B:00:60:01)and RX MAC address(00:0b:78:00:60:02) are defaulted
by system. And MAC address is the identifier for every site of internet, it is 6 bytes, RA the
registration administration of IEEE assigns the first three bytes to different factories,the last three
bytes are assigned by users. MAC address is consist of figures (O~9) and letters (a~f).
We do not suggest that users change the first three bytes, the last three bytes can be changed
accordingly.
2 Connect PC net port with TX or RX net port directly. Power the system to connect
PC and TX or RX through.
3 lnput TX (192.168.168.55) or RX (192.168.168.56) IP address to IE address bar and enter into
control page. Click system on the page left menu bar, then can change IP and MAC address in
switch information page.
12
EN
HDMI EXTENDER MATRIX