background image

HDMI EXTENDER MATRIX  

14

EN

The product is compliance with EMC Directive 2004/108/EC and ROHS2 2011/65/EU

This product is marked with this symbol. It means that used electrical and electronic 

products should not be mixed with general household waste.

There is a separate collections system for these products in compliance with EU 

Directive WEEE.

INTENDED USE

We do not permit using the device in other ways like described in this user’s manual.

Use the product only in dry interior rooms. Not attending to these regulations and safety 

instruction might cause fatal accidents, injuries, and damages to persons and

property. The manufacturer/supplier assumes no liability for damages caused by failure 

to comply with the intended use.

To reduce risk of electric shock, this product should 

ONLY be opened by an authorized technician when 

service is required. Disconnect the product from mains 

and other equipment if a problem should occur. Do not 

expose the product to water or moisture.

C A U T I O N

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

•   Your product is not a toy and is not meant for children, because it contains small parts which can 

be swallowed and can injure when used inappropriately!

•   Please install the system and devices attached to it in a way that persons cannot be injured, or 

objects not be damaged for example by dropping or stumbling.

•  Please remove the packing materials, because children may cut themselves on them while playing.

  Furthermore, there is a risk of swallowing and inhalation of incidentals and insulating material.

•  Avoid  places  with  high  temperatures,  or  humidity,  or  places  which  might  come  into  contact 

with water. Do not install the product close to openings of air conditioners, or at places with an 

excessive amount of dust or smoke.

•   Do not install the product at places subject to vibration, or oscillation

•   Do not modify and alter the product and any accessories! Do not use any damaged parts.

•   Keep  enough  space  around  all  devices  for  a  good  ventilation  and  free  motion  and  to  avoid 

damages.

•  Do not unplug the deive when it is in using, keep distance from flammable and explosive devices.

•  Power supply: DC 5V, usage only the supplied power unit, do not use the power supply if it is 

damaged.

Important saFety InstrUctIon  

Summary of Contents for IDATA HDMI-MX373

















Reviews: