The red
Escape button
is for canceling any procedure and for closing open menu
windows in order to return to the measurement mode.
In the „Start“-version of SpectroPlate certain „soft keys“ will be not selectable and
are shaded in gray. These are the functions which are only available for the „Expert“-
and „All-Vision“-model.
Device settings
The „soft key“ with the tool symbol opens the window for the device settings.
Within this window you can navigate with the
Arrow buttons
and select with the
Enter button
. The red
Escape button
brings you back to the measurement mode.
The
INFO
screen shows the type
of device (Start, Expert, All-Vision),
the software- and hardware version
as well as the serial number.
Performing a
calibration
is described on the next page.
Displays a
grid array
as shown here:
Sound
will activate an accoustic signal after each
measurement.
The LCD
display contrast
can be turned darker or brighter.
Sets the menu
language
of the device.
A
reset
puts the device to factory settings.
Attention! All stored measurement values and recently made
calibrations will be deleted. Only the factory-set calibration
values are still valid.
All measurement values get
a
time- and date stamp
.
This information will be
visible when the data is
transmitted to the PC soft-
ware SpectroPlate Connect.
Manual TECHKON SpectroPlate Chapter 1 - How to use SpectroPlate
Page 12
onl
y Exper
t
