3.3 Overview
The application will be installed in the
Windows program files section in the
folder „TECHKON GmbH / TECHKON
SpectroPlate Connect“.
After starting the program the main screen will appear. It is devided into three logical
segments: On the left side the contents of the device memory, in the center the
active Program module and in the lower right corner the Program module bar, which
lists all available and selectable modules.
Manual TECHKON SpectroPlate Chapter 3 - Windows-Software
Page 26
Program symbol
SpectroPlate Connect
Shows the list of available program modules. They can be
selected from this bar directly via mouse click.
After launching SpectroPlate Connect it is pre-set to display
the module „Transfer curve“.
When SpectroPlate Expert/
All-Vision is connected the
contents of the memory will
be shown here.
The menu bar includes functions known from
standard Windows applications. They comprise:
New, Open, Save, Print and Quit.
The USB symbol indicates, that the device is
connected properly.
Active program-module
The measurement window shows
either the last measurement taken
or the measurement values of a
data set selected from the lower
list.