Geometrical analysis
SpectroPlate Expert can be used as a digital microscope as well. Microscopic small
structures can be viewed on the LCD display and can be transferred as high resolu-
tion image files to a PC.
The measurement function
Geometrical
analysis
evaluates the geometrical proper-
ties of circles.
The smallest and the largest
diameter
are
analyzed and displayed. If there is a certain
number of circles within the sample area
the average value of all circles captured for
the smallest and largest diameter will be
displayed.
The measurement unit can be either micro-
meter or mils, depending on the setting done.
The „soft key“
Sliding rule
activates a
function which allows to make microscopic
distance measurements
The dotted lines are the left and right refe-
rences to determine distances. The flashing
line can be moved with the Arrow buttons.
It gets locked by pressing the Enter but-
ton. Now the other line flashes and can be
moved.
The red Escape button or optionally the
green measurement button lead back to the
measurement mode.
Der „soft key“ sliding rule can be selected
from the measurement function
Dot per-
centage
and
Geometrical analysis
.
left and right reference
of the Sliding rule
„Soft key“
Sliding rule
The zoom function can be
used to view the object in
the right size.
Manual TECHKON SpectroPlate Chapter 2 - Measurement functions
Page 22