TECHFASS WREM 81 MTM, Manual

Page: 12 / 15

www.techfass.com
RFID reader WREM 81 MTM(VR) 12
5 Settings
5.1 Setup procedure
If we would like to set the reader parameters, e.g. its RFID parameters or Wiegand output, we must connect it to the
computer and control software. Physical connection is possible using the device
via USB
APSUSB
https://www.techfass.com/cs/produkty/102/produkt/1216/apsusb
via LAN
APSLAN
https://www.techfass.com/cs/produkty/102/produkt/94/apslan
5.1.1 Software application
The desktop application for configuration and firmware update:
APS Reader https://www.techfass.com/cs/produkty/101/produkt/389/aps-reader
5.2 Indicative parts RGB LED and buzzer
PART ACTION DESCRIPTION
Red LED Continuously lit Power supply
Green LED Flash ID media reading, lock release (driven by signal IN2)
Yellow LED
Flash
According to the configuration
Buzzer Buzzing
ID media reading, lock release (driven by signal IN1)
5.3 Configurable parameters
The WREM 81 reader allows RFID read configuration, ID bit length and wiegand output format settings.
5.3.1 125 kHz
Enable / Disable
▪
Standard em marin & TF ID
▪
Jablotron ID
*Default settings: all enabled.
ID Length
125 kHz bits
ID 24 32 40 44 56
* Default settings: 40 bits format.
Wiegand output format settings
125 kHz bits
Data 26 32 42 44 56
*Default settings: 42 bits format.