TECHCON TS980, User Manual, Page: 49 / 65

9.5.7 Reset Cycle Counter
The cycle counter records the number of dispense cycle being
activated. Up to 999,999,999 cycles can be recorded for each of the
programs saved in memory. To reset the counter for the current
program, follow the steps below:
1. Touch the ‘Settings’ icon to enter the setup screen.
2. Touch the ‘Counter Reset’ icon to reset the counter.
3. Touch the ‘Accept’ icon to confirm or touch the
‘Cancel’icon
to exit without resetting counter.
9.5.8 To Run in Dot or Line Mode
1. Touch to toggle between the line or dot icons to
switch mode. Note : switching from Line to Dot mode may
required a re-entry of a specific number of pulses desired to run the
parameter or setup.
1.
techcon.com/contact-us
49
Jet Valve Dispensing System User Guide
TS9800 & TS980