![background image](http://html1.mh-extra.com/html/techcon/ts980/ts980_user-manual_1066385027.webp)
1.
After purging the system with an appropriate cleaning solution, turn the
system off and disconnect all connections to the valve.
2.
Remove the nozzle unit by using the nozzle adjustment tool to rotate it
counterclockwise.
3.
Remove the nozzle bushing (6) with the nozzle insert (7) from the nozzle
adjustment nut (8) by using the nozzle installation tool to rotate it
counterclockwise.
4.
Remove the nozzle insert (7) from the nozzle bushing (6).
5.
Remove the O-ring from the nozzle bushing. The pointed-tip tweezers
can be used to pull the O-ring off. Be careful not to damage the
nozzle bushing’s surfaces.
(It’s not recommended to reuse the
O-ring after thorough cleaning)
27
Jet Valve Dispensing System User Guide
TS9800
& TS980