Operator's guide:
1)Unpacking instructions
2)The handle
3)Round glass shelves
4)Square glass shelves
5)Grid shelves
6)Wooden trays
7)Cleaning of the internal glass panels
8)External cleaning
9)Connection to mains
10)Controls
11)Checking the correct functioning
12)Internal cleaning
13)Replacement of internalight
14)Replacement of the door magnetic gasket
1)Cleaning the condenser
2)Cleaning the evaporator
3)Replacement of a glass panel
4)Wiring diagram diagram of refrigeration unit
Maintenance manual (Page 48):
!
I
UK
D
E
F
NL
P
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO
6
Operator's guide
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
1
. Adults should operate this appliance only. Do not allow children to use the controls or play with it.
2
3
4
5
6
7
. It
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
installation of the appliance should be carried out by a qualified electrician or other competent person.
. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs. . The
manufacturers of this appliance accept no responsibility for the consequences of misuse in contravention
of these safety instructions. It further reserves the right to carry out improvements without prior notice.
8
9
10
11
12
13
. Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance near sources of
heat, such as radiators, stoves, etc.
. Keep the ventilation grills free from obstruction for at least 30 cm.
.Ensure that the products displayed on the shelves and grills do not hang over the edges.
. If damp
air or products to be refrigerated should cause ice to form on the evaporator, we recommend stopping the
compressor and placing the goods in special refrigerated containers, kept at the same temperature, until
defrosting is completed;if this is not carried out the compressor will continue to operate leading to a
wasteful consumption of electricity and poor performance.
. If the appliance is not working and unused,
it is indispensable to keep the door open at least 10 cm. Avoiding this, you will avoid also the consequent
mildew formation and unpleasant smells.
1.
2
3
4
5
6.
7.
Remove the nails from
the wooden crate with care. . Insert forks of fork-lift truck between the appliance and pallet or crate .
. Lift the appliance. . Remove the pallet or crate. . Place the appliance on a horizontal level surface
Pay attention anything is left inside the packing.
Separate the packing materials according to their
type, for easier disposal (See picture 1).
(see picture 2).
The shelves have to be fastened
using the screws contained in the pack inside the appliance, with the plastic part towards the glass.
Tighten with care (see picture 3).
(see picture 4).
(see picture 5).
.
. Remove the
protection tape from the steel panel and from the grids (see picture 7).
2.
2
UNPACKING INSTRUCTIONS
1a
2. THE HANDLE
1
2.
3.
3. ROUND GLASS SHELVES
R
1
4. SQUARE GLASS SHELVES
Q
1
2.
(A). 3
(B),
(C). 4
5
6
5. GRID SHELVES
G
1
2
(B),
(C ). 3
6. WOODEN TRAYS
PHASTA
7. CLEANING OF THE INTERNAL GLASS PANELS
1.
2
8. EXTERNAL CLEANING
1
. Cut surrounding tape. Remove the cardboard packaging by sliding upwards.
. The handles will be found in a package inside the appliance.
Fix the base part of the handle using
the two screws inserted on the holes already. Tighten them with care.
Place the plastic part and press
down until it clicks into place
. These shelves, to be found in the cardboard box, should be slid into the supports placed in the vertical
rotating frame (first introduce the mirror shelf, in the lower position)
. The supports and the suction cups (n° 4 for each shelf) are into a pack, inside the appliance.
Insert
the suction cup heads into the support holes, pushingdownwards
. Fix the support, inserting the
hook on the vertical frames slits
pushing them downwards
. The shelves, to be found into a
carton box, should be put on their supports. . First place the mirror shelf, in the lower position. . Press
the other shelves on the wet suction cups
.The support are in a pack inside the appliance. . Fix the supports, inserting the hook on the vertical
frames slits
pushing them downwards
. The grid shelves are into a carton box. Place the grids
on the supports, their raised edge opposite to the door
For the Phasta models, the manifacturer install the wooden trays already
Only clean the internal component and glass panels with a soft,wet sponge and a neutral detergent.
. Dry with care using a soft cloth.
. For the glass panels use the same products as used for the internal cleaning.
Model
Model
Model
Model
!
Our products are for internal use only do not install outside restaurants, shops
