Operator's guide:
1)Unpacking instructions
2)Adjusting the shelves
3)Internal cleaning
4)External cleaning
5)Connection to the mains
6)Controls
7)Checking correct operation before use
8)Internal cleaning
9)Replacing the internal lights
Maintenance manual (Page 48):
1)Cleaning the condenser
4)Wiring diagram diagram of refrigeration unit
2)Cleaning the evaporator
3)Replacing a sliding glass door
!
!
I
UK
D
E
F
NL
P
S
DK
FIN
B
GR
CZ
EE
LV
LT
H
M
PL
SK
SLO
6
Operator's guide
WARNINGS
It is most important that this instruction booklet is kept together with the appliance both for future
reference and for reasons of safety.
1
. Adults should operate this appliance only. Do not allow children to use the controls or play with it.
2
3
4
5
6
7
. It
is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical
installation of the appliance should be carried out by a qualified electrician or other competent person.
. Never attempt to carry out repairs unassisted. Inexpert repairs can cause serious damage and
malfunction. . Assistance has to be provided by an authorized engineer only. Always use original spare
parts. . This appliance is not suitable for the storage of basic commodities not including food-stuffs.
. The manufacturers of this appliance accept no responsibility for the consequences of misuse in
contravention of these safety instructions. It further reserves the right to carry out improvements without
prior notice.
8
9
10
11
12
13
14.
Our products are for internal use only
–
do not install outside restaurants, shops.
. Avoid installing the cabinet directly in line with sunlight. . Nevere install the appliance
near sources of heat, such as radiators, stoves, etc.
. Keep the ventilation grills free from obstruction
for at least 30 cm.
. Ensure that the products displayed on the shelves and grills do not hang over the
edges.
. If damp air or products to be refrigerated should cause ice to form on the evaporator, we
recommend stopping the compressor and placing the goods in special refrigerated containers, kept at the
same temperature, until defrosting is completed;if this is not carried out the compressor will continue to
operate leading to a wasteful consumption of electricity and poor performance.
. If the appliance is not
working and unused, it is indispensable to keep the door open at least 10 cm.
Do not keep the neon
light up if the refrigeration is off.
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGE 1a
WOODEN CRATE 1b.
2.
3
4
5
6.
7
2. ADJUSTING THE SHELVES
1.
2.
3
4
3. INTERNAL CLEANING
1
2.
4. EXTERNAL CLEANING
1.
. 2
5. CONNECTION TO THE MAINS
1
2.
3.
4.
N.B.
5
. Cut the strap and lift up the cardboard package.
Remove the nails from the wooden crate with care.
Insert the forks of a forklift truck between the
appliance and pallet or crate. . Lift up the appliance. . Remove the pallet or crate. . Let down the
appliance onto a flat and level surface, and adjust the feet.
Make sure there is nothing left in the
package before disposal. . Separate the packaging materials to facilitate disposal (see figure 1).
Raise the shelf.
Turn it downwards. . Remove it. . Put it in the new position, in reverse order,
making sure there is a shelf on the left and on the right (see figure 2).
. Remove the protective film from the trays.
Clean the internal parts and glass surfaces with a soft
sponge and neutral detergents.
Use the same products as used for the internal cleaning
. Remove the protective covering from the
steel panels and from the grilles.
. Ensure that the voltage and frequency of the mains supply are the same as those indicated on the
rating plate attached to the appliance (A).
Ensure that the socket to supply the electricity has the
following characteristics:
.
Ensure that there is no danger of
explosion (AD) in the room.
Make sure the environment is suitable for the power supply cable
provided. The cable of the appliance is H05 VVF, designed for internal use.
: if the equipment has
been transported or stored overturned, let is rest in its correct position for at least 3 hours before hooking
it up to the mains. . Insert the plug into the socket (do not use three-way adapters and reduction
adapters) (see figure 3).
a)
.b)
. c)
It is properly earthed
It fulfils the requirements of the rated current as set
out on the rating plate
It complies with the IEC regulations: magnetothermal differential switch with IN
as stated on appliance rating plate and ID sensitivity of 30 mA
