tecan GENios Operating Manual Download Page 23

Page: 23 / 59

5. Instrument Features

5.1 Specifications

(GENios)

The following types of measurement are provided with the GENios microplate
reader.

Measurement Type

Read Mode

Microplates to be Used

Fluorescence (see 5.1.1) Standard and time-

resolved, top and bottom

6 - 384 wells

Absorbance (see 5.1.2)

Single and dual
wavelength

6 - 384 wells

Glow type luminescence
(see 5.1.3)

wells

The instrument allows for kinetic measurements

Reading may be restricted to one part of the microplate.
Up to four-measurement parameter sets can be queued using

LUOR

Use of cuvettes

Please Note:

For cuvette use TECAN provides an adapter plate which fits up to 4

standard 10 mm cuvettes that can be measured simultaneously

(compatible with Hellma 10 mm 110-QS cuvettes equipped with PTFE

plug).

The cuvettes are positioned horizontally in the 4 designated areas.

The cuvette should be filled completely and closed tightly in order to exclude air
from the measurement chamber and ensure reliablity of results.

Select the provided CUV.pdf plate format from the plate definition file before the
measurement is started.

The table below lists the technical specifications for the instrument.

Parameters Characteristics

Measurement Software

controlled

Interface

Serial interface: RS 232

Filter handling

External filter exchange

Up to 4 excitation filters and 4 emission filters in
separate filter slides.
Up to 8 excitation and emission filter slides can be
defined when using software.

Plate definition

Via scanning software

Temperature control

From a5°C up to 42°C

Plate shaking

Orbital or linear shaking - both offer 3 speeds

June 2002

Operating Manual for GENios, GENios FL, and GENios

Plus

No: I 112 904 Rev No: 1.1

5-1

Summary of Contents for GENios




























































Search results

Summary of Contents for GENios

Reviews:

Related manuals for GENios

Brands by name

Popular brands

tecan GENios, Operating Manual

Search results

Summary of Contents for GENios

Reviews:

Related manuals for GENios

Brands by name

Popular brands