3. DISASSEMBLY
AND
REASSEMBLY
EO18-13004
3.3 Disassembling the Mechanism Unit
3- 9
3.3.5 Removing the Auto Cutter SA
1. Remove the four ST-3x6 screws to remove the auto cutter SA.
Removing the Auto Cutter and Its Peripheral Parts
1. Remove the two M-3x4 screws and slide the auto cutter in the direction of the arrow to
remove.
2. Remove the EXT spring-03.
3. Pull out the safety cover shaft from the cutter plate and the safety cover.
4. Remove the safety cover from the cutter plate.
3.3.6 Removing the Lock Levers
1. Remove the EXT spring 01 from the lock lever-R-SA.
2. Pull out the ejector.
3. Remove the lock lever-R-SA from the right end of the lock lever-L-SA.
4. Remove the lock lever-L-SA by pulling it to the left.
Auto Cutter SA
ST-3x6
Main Chassis
Fig. 3-16
Fig. 3-17
Safety Cover
Auto Cutter
Cutter Plate
M-3x4
EXT Spring-03
Safety Cover Shaft
EXT Spring-01
Fig. 3-18
Lock Lever-L-SA
Main Chassis
Ejector
Lock Lever-R-SA
