6. TERMINAL FILE PROGRAMMING
EO3-11106
6.15 Print Line Item Name Programming
6-78
3) Example
To program the amount mark “€” in Item Code 7: (The amount mark has not been preset as the standard
program data).
Meanwhile, the names of the other items in the Item Code 7 should remain unchanged as the standard
program data (i.e. “@” for Unit Price Symbol and “ITEM” for Sale Item Count Symbol).
Operation LCD
Display Remarks
When the ECR is being outside a sale
and in
SET
mode, depress the
[
↓
]
key.
The cursor is moved on to “
2 NAMES
”.
Depress the
[2]
or
[Enter]
key.
“
2 NAMES
” is selected.
Depress the
[
↓
]
key six times.
The cursor is moved on to
”
7 PRINT ITEM NAME
”.
Depress the
[7]
or
[Enter]
key.
”
7 PRINT ITEM NAME
” is selected.
Depress the
[
↓
]
key six times, then
depress the
[Enter]
key.
(Item code 7 (“@ ITEM ”) is selected.)
While ? is shown on the upper-right corner
of the LCD display screen, the
[?]
key
depression results in that the following
guidance message appears on the LCD
display.
The
[C]
key depression clears the print
line item name already programmed.
The print line item name already
programmed is displayed.
Input a desired name.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
400[#] 900[#] [I] [T] [E] [M] [
→
] [Enter]
The
[Enter]
key depression results in
that the input name is entered and
displayed.
When the
[Enter]
key is depressed, the
programmed data is printed.
(continued on the next page)
