6. TERMINAL FILE PROGRAMMING
EO3-11106
6.18 Read/Reset Report Name Programming
6-94
3) Example
To program “X_DP_PROFIT” instead of standard program data “X_PROFIT” for Report No. 21.
Operation LCD
Display Remarks
When the ECR is being outside a sale
and in
SET
mode, depress the
[
↓
]
key.
The cursor is moved on to “
2 NAMES
”.
Depress the
[2]
or
[Enter]
key.
“
2 NAMES
” is selected.
Depress the
[
↓
]
key nine times.
The cursor is moved on to
”
0 X/Z REPORT NAME
”.
Depress the
[0]
or
[Enter]
key.
”
0 X/Z REPORT NAME
” is selected.
Depress the
[
↓
]
key twenty times, then
depress the
[Enter]
key.
(Report No. 21 (“X_PROFIT”) is
selected.)
While ? is shown on the upper-right corner
of the LCD display screen, the
[?]
key
depression results in that the following
guidance message appears on the LCD
display.
The
[C]
key depression clears the
report name already programmed.
The report name already programmed is
displayed.
Input a desired name.
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[X] 515 [#] [D] [P] 515 [#] [P] [R] [O] [F] [I]
[T] [Enter]
The
[Enter]
key depression results in
that the input name is entered and
displayed.
When the
[Enter]
key is depressed, the
programmed data is printed.
(continued on the next page)
