6. TERMINAL FILE PROGRAMMING
EO3-11106
6.11 Cashier Name and Status Programming
6-64
NOTES:
1. Cashiers 1 to 8 are programmed with the names “1CL” to “8CL” as default setting.
2. For the name of each cashier, a maximum of 12 one-byte or 6 two-byte characters can be entered.
A combination of both types is also available.
3. Training entry status is available for every cashier.
4. Prior to the change of cashier status (Normal cashier
→
Training cashier, or Training cashier
→
Normal
Cashier), daily reports and GT reports of this cashier should be taken.
3) Example
To program the following cashier data.
Cashier 1: JONES (cashier name), Training Cashier (status)
Operation LCD
Display Remarks
When the ECR is being outside a sale
and in
SET
mode, depress the
[
↓
]
key.
The cursor is moved on to “
2 NAMES
”.
Depress the
[2]
or
[Enter]
key.
“
2 NAMES
” is selected.
Depress the
[
↓
]
key twice.
The cursor is moved on to “
3 CASHIER
NAME
”.
Depress the
[3]
or
[Enter]
key.
“
3 CASHIER NAME
” is selected.
The cashier name already
programmed is displayed.
While ? is shown on the upper-right corner
of the LCD display screen, the
[?]
key
depression results in that the following
guidance message appears on the LCD
display.
The
[Enter]
key depression allows the
ECR to enter Cashier 1 programming
mode menu.
(To program a desired cashier, select
the cashier with the
[
↓
]
key then
depress the
[Enter]
key.)
While ? is shown on the upper-right corner
of the LCD display screen, the
[?]
key
depression results in that the following
guidance message appears on the LCD
display.
(continued on the next page)
