6. TERMINAL FILE PROGRAMMING
EO3-11106
6.7 Footer Message Programming
6-53
3) Example:
To program the following Footer Message.
Operation LCD
Display Remarks
When the ECR is being outside a sale
and in
SET
mode, depress the
[1]
or
[Enter]
key.
Depress the
[
↓
]
key.
The cursor is moved on to “
2 FOOTER
MESSAGE
”.
Depress the
[2]
or
[Enter]
key.
The message already programmed is
displayed.
While ? is shown on the upper-right corner
of the LCD display screen, the
[?]
key
depression results in that the following
guidance message appears on the LCD
display.
The
[Enter]
key depression allows the
ECR to enter the 1st line message
input mode. (The
[C]
key depression
clears the message already
programmed.) The 1st line message is
input.
(To program a message in a desired
line, move the cursor there with the
[
↓
]
key then depress the
[Enter]
key.)
Numbers of programmed characters and of
programmable characters are displayed on
the 7-segment numeric display.
Example of key operation)
[
→
] [
→
] [
→
] [
→
] [
→
] [
→
] [T] [A/a] [h] [a] [n]
[k] [
→
] [A/a] [Y] [A/a] [o] [u] [Enter]
The
[Enter]
key depression results in
that the input message is entered and
displayed.
When the
[Enter]
key is depressed, the
message programmed in the 1st line is
printed.
(continued on the next page)
T
h
a
n
k
y
o
u
C
a
l
l
a
g
a
i
n
Line No. 1
Line No. 2
Number of programmed characters
Number of programmable characters
