Teamco SNOWBLAST 9600A, Operator'S Manual

Page: 48 / 78

OPERATION
9
600A 04/0
8
Operation Section 4-12
OPERA
T
ION
7.2 Snow Blower Pre-Operation Inspection/Service
Before each implement use, a complete inspection and service is required to ensure the implement is in a
good and safe working condition. Damaged and/or broken parts should be repaired and/or replaced
immediately. To ensure the implement is ready for operation, conduct the following.
OPS-SB-0006
The operator’s manual and safety signs affixed on
the unit contain important instructions on the safe
and proper use of the equipment. Maintain these
important safety features on the implement in good
condition to ensure the information is available to
the operator at all times.
• Ensure the manual canister is secured to the
equipment with the operator’s manual inside.
• Ensure all safety signs are in place and legible.
Replace missing, damaged, and illegible
decals.
OPS-U- 0011
• Check that the main driveline is securely
attached to the tractor and the locking collar is
seated in the groove of the PTO Shaft.
• Check that the snow blower driveline is
securely attached.
• Inspect that the snow blower pivot pins are the
proper size, correctly installed, and secured to
the tractor lift arms with retaining pins inserted.
OPS-SB-0007
When attaching the Implement input driveline to the Tractor PTO, it is important that the
connecting yoke spring activated locking collar slides freely and the locking balls are seated
securely in the groove on the Tractor PTO shaft. A driveline not attached correctly to the
Tractor PTO shaft could come loose and result in personal injury and damage to the
Implement.
(S3PT-17)
2008 Teamco Inc.