Teamco SNOWBLAST 9600A, Operator'S Manual

Page: 63 / 78

OPERATION
9
600A 04/0
8
Operation Section 4-27
OPERA
T
ION
12. SNOW BLOWER STORAGE
Properly preparing and storing the implement at the end of the season is critical to maintaining its appearance
and to help ensure years of dependable service. The following are suggested storage procedures:
1. Thoroughly clean all debris off the implement
to prevent damage from rotting grass and
standing water.
2. Lubricate all implement grease points and fill
spindle oil level as detailed in the
maintenance section.
3. Tighten all bolts and pins to the recommended
torque.
4. Check the implement for worn and damaged
parts. Perform repairs and make
replacements immediately so that the
implement will be ready for use at the start of
the next season.
5. Store the implement in a clean, dry place with
the implement resting securely on blocks or at
ground level..
6. Keep the driveline yokes or hydraulic hoses
from sitting in water, dirt and other
contaminants.
7. Use spray touch-up enamel where necessary
to prevent rust and to maintain the
appearance of the implement.
Never allow children to play on or around Tractor or Implement. Children can slip or fall off
the Equipment and be injured or killed. Children can cause the Implement to shift or fall
crushing themselves or others.
(SG-25)
13. TRANSPORTING THE TRACTOR AND SNOW BLOWER
Inherent dangers of operating the tractor and implement and the possibility of accidents are not left behind
when you finish snow blowing an area. Therefore, the operator must employ good judgement and safe
operation practices when transporting the tractor and implement between locations. By using good
judgement and following safe transport procedures, the possibility of accidents while moving between
locations can be substantially minimized.
OPS-SB-0022
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death.
(SG-10)
2008 Teamco Inc.