Teamco SNOWBLAST 9600A, Operator'S Manual

Page: 50 / 78

OPERATION
9
600A 04/0
8
Operation Section 4-14
OPERA
T
ION
• Perform scheduled lubrication as specified in
the maintenance section.
• Inspect the oil level and condition of oil
reservoir and replenish if needed. (Add specific
type oil if low.)
• Ensure there are no leaks and fittings are
properly connected.
OPS-SB-0010
Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up
to prevent sudden or inadvertent falling which could cause serious
injury or even death.
(SG-14)
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and
fuel are explosive and their presence could present a hazard. Do not
check for leaks with your hand! High-pressure oil streams from breaks in
the line could penetrate the skin and cause tissue damage including
gangrene. To check for a hose leak, SHUT the unit ENGINE OFF and
remove all hydraulic pressure. Wear oil impenetrable gloves, safety
glasses and use Cardboard to check for evidence of oil leaks. If you
suspect a leak, REMOVE the HOSE and have it tested at a Dealer. If oil
does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure.
(SG-15)
2008 Teamco Inc.