Teamco SNOWBLAST 9600A, Operator'S Manual

Page: 14 / 78

SAFETY
9
600A 04/0
8
Safety Section 1-8
SAFETY
Only operate the snow blower in conditions were you have clear visibility in daylight or with
adequate artificial lighting. Never snow blow in darkness or in conditions where you cannot
clearly see at least 100 yards in front and to the sides of the Tractor and Snow Blower. Make sure that you can
clearly see and identify passersby, steep slopes, ditches, drop-offs, overhead obstructions, power lines, debris
and foreign objects. If you are unable to clearly see these types of items, discontinue snow blowing.
(SSB-1)
Many varied objects, such as wire, cable, rope, or chains can become entangled in the
operating parts of the Snow Blower. These items could then swing outside the housing at
high speeds. Such a situation is extremely hazardous and could result in serious injury or
even death. Inspect the work area for such objects before snow blowing. Remove any like
object from the site. Never allow the
fans
to contact such items.
(SSB-3)
Blow snow at the speed that you can safely operate and control the Tractor and Snow
Blower. Safe speed depends on terrain and snow conditions. Normal ground speed range
is from 0 to 5 mph. Use slow speeds when operating on or near steep slopes, ditches, drop-
offs, overhead obstructions, power lines, or when debris and foreign objects are to be
avoided.
(SSB-4)
Snow Blowers are capable under adverse conditions of throwing
objects for great distances (200 feet or more). Do not allow the
snow stream to fall on passersby. Ice, debris and heavy snow
thrown from the snow blower can cause serious injury or death.
(SSB-7)
STOP SNOW BLOWING IF PASSERSBY ARE WITHIN 200 FEET.
When blowing snow with two machines in the same area be sure that windows are closed.
(SSB-10)
There are obvious and hidden potential hazards in the operation of this Snow Blower.
REMEMBER! This machine is often operated in deep snow where vision is reduced. The
fan
s
of this Snow Blower can throw objects for great distances Serious injury or even
death may occur unless care is taken to insure the safety of the operator, bystanders, or
passersby in the area. Do not operate this machine with anyone in the immediate area.
Stop Snow Blowing if anyone is within 200 feet of Snow Blower.
(SSB-11)
Extreme care should be taken when operating near loose objects such
as gravel, rocks, wire, and other debris. Inspect the area before
snowblowing
. Foreign objects should be removed from the site to prevent machine
damage and/or bodily injury or even death. Any objects that cannot be removed must
be clearly marked and carefully avoided by the operator. Stop
snowblowing
immediately if
fans
strike a foreign object. Repair all damage and make certain
fans are
balanced
before resuming mowing.
(SGM-5)
2008 Teamco Inc.