Team SILK SX28-72, Instruction Manual

Page: 23 / 93

SX28-72 Flange Facing Machine
22
SECTION 5 SITE OPERATION
5.1 WARNINGS AND CAUTIONS
When operating this equipment observe all warning and cautions detailed below and in Section
3.
IN ADDITION TO THE CONTENT OF THIS PUBLICATION, JOB SPECIFIC AND
SITE-SPECIFIC SAFETY PROCEDURES MUST BE ADHERED TO AT ALL
TIMES.
BEFORE OPERATING THIS EQUIPMENT A SAFE WORKING “NO GO” AREA
MUST BE CORDONED OFF AROUND THE WORK AREA TO ELIMINATE
ACCIDENTAL INTRUSION BY UNAUTHORISED PERSONNEL.
THIS EQUIPMENT HAS DANGEROUS MOVING PARTS, KEEP WELL CLEAR
AT ALL TIMES.
DO NOT ATTEMPT TO MAKE ADJUSTMENTS WHILE THE EQUIPMENT IS
OPERATING. ALWAYS STOP AND ISOLATE FIRST.
THIS EQUIPMENT MAY BE USED IN CONJUNCTION WITH OTHER JOB
SPECIFIC EQUIPMENT SUCH AS LIFTING ACCESSORIES AND CUTTING
TOOLS. SUCH EQUIPMENT MUST BE INSPECTED FOR SUITABILITY PRIOR
TO USE.
DO NOT ATTEMPT TO FEED OR RETRACT THE TOOLPOST IF THE
TOOLPOST IS LOCKED IN POSITION.
ON COMPLETION OF A JOB THE MACHINE MUST BE CLEANED AND
PRESERVED IN ACCORDANCE WITH THE INFORMATION CONTAINED IN
THE PRESERVATION AND PACKAGING SECTION OF THIS MANUAL
(SECTION 5.5).