background image

i

i

i

i

i

i

i

i

i

i

i

i

i

INTRO

INTRO

Intro to the 8IGHT-T 2.0

 Manual

STEP I-01

Safety Precautions and  Warnings

Read and follow all instructions and safety precautions before use. Improper use can result in fi re, serious injury and damage to property.

Components 

Some electronic components can become hot while in use. Do not touch parts until cool. 
Use only with compatible components. Should any compatibility questions exist please refer to the product instructions, the component instructions 
or contact Horizon Hobby, Inc. 

Batteries

Always follow the manufacturer’s instructions when using and disposing of any batteries. Mishandling of Li-Po batteries can result in fi re causing 
serious injury and damage.

Small Parts

This kit includes small parts and should not be left unattended near children as choking and serious injury could result.

Safe Operating Recommendations

•  

Inspect your model before every run to make certain it is track worthy.

•  

Be aware of any other radio frequency user who may present an interference problem.

•  

Always be courteous and respectful of other users of your selected driving area.

• 

Choose an area clear of obstacles and large enough to safely accommodate your driving activity.

•  

Make certain this area is clear of friends and spectators prior to running your vehicle.

•  

Be aware of other activities in the vicinity of your path that could cause potential confl ict.

IMPORTANT SAFETY NOTES:

• 

 Select an area for assembly that is away from the reach of small children. 

Some parts in this vehicle are small and can be swallowed by children, 

causing choking and possible internal injury; PLEASE USE CAUTION! 

• 

 The shock fl uid and greases supplied should be kept out of children’s reach.

 They are not intended for human consumption!

• 

 Exercise care when using any hand tools, sharp instruments, or power tools during construction.

• 

 Carefully read all manufacturer’s warnings and cautions 

for any chemicals, glues, or paints that may be used for assembly and operating purposes.

Age Recommendation: Not for children under 14 years. This is not a toy.

NOTICE:

 All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon Hobby, Inc.  

For up-to-date product literature, visit http://www.horizonhobby.com and click on the support tab for this product.

Meaning of Special Language:

The following terms are used throughout the product literature to indicate various levels of potential harm when operating this product:
NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND little or no possibility of injury.
CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a possibility of serious injury.
WARNING: Procedures, which if not properly followed, create the probability of property damage, 
collateral damage, and serious injury OR create a high probability of superfi cial injury.

        

  WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before operating. Failure to operate the 

product correctly can result in damage to the product, personal property and cause serious injury. 
This is a sophisticated hobby product and NOT a toy. It must be operated with caution and common sense and requires some basic mechanical 
ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the product or other property. This 
product is not intended for use by children without direct adult supervision. Do not attempt disassembly, use with incompatible components or 
augment product in any way without the approval of Horizon Hobby, Inc. This manual contains instructions for safety, operation and maintenance. It 
is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid 
damage or serious injury.

 

Thank you for selecting the 

8IGHT-T 2.0

 as your new racing truggy. The 

8IGHT-T 2.0

 has already distinguished itself as a top caliber racing chassis 

and as you will see, we have made every eff ort to produce a vehicle that is not only the most competitive but also easy to maintain. The simple step-
by-step assembly sequence and easily followed instructions and drawings combined with Team Losi Racing's world famous quality fi tting parts will 
make using the 

8IGHT-T 2.0

 a most enjoyable vehicle.

 

Please take a moment to read through the following instructions. This will familiarize you with the various parts, assembly tips and descriptions 

as well as the tools needed. Taking an extra moment before using your vehicle will help you understand the dynamics of the 8IGHT-T 2.0 and setup 
tips to ensure the best possible experience.
Good luck and good racing,
  Team 

Losi 

Racing

Welcome Team Losi Racing 

8IGHT-T 2.0

 Owner!

Register your Losi Product Online:

Register your 8IGHT-T 2.0 now and be the fi rst to fi nd out about the latest options parts, product updates and more. 
Log on to WWW.TLRACING.COM and follow the product registration link to stay connected.

Summary of Contents for 8IGHT-T 2.0 RTR Truggy















































Reviews: