18
BACK VIEW CAMERA
This unit is equipped with back view camera output. The camera is used to observe
the situation behind the vehicle when you are backing the car.
Please connect your back view camera with the back car video input. And connect the
reverse wire for back a car with the rear gear light. Rear view camera picture will be
enabled when you are backing the car.
AUTO SWITCH TO VIDEO
To promote safety, certain functions are disabled unless the parking brake is on. The
Unit is designed to detect parked status and must be connected to the power supply
side of the parking brake switch. When playing a movie file in a driving car, a warning
screen will be displayed on the screen. When the car is placed on the hand brake, the
screen will switch to video automatically. Improper connection or use of his connection
may violate applicable law and may result in serious injury or damage. To avoid the
risk of damage and injury and the potential violation of applicable laws, this unit is not
for use with a video screen that is visible to the driver. Also, other video displays
should not be in a location where it is a visible distraction to the driver. In some
countries or states the viewing of images on a display inside a vehicle even by
persons other than the driver may be illegal. Where such regulations apply, they must
be obeyed and this unit's movie features should not be used.
Note
: The supplier waves any and all liability when these guidelines and warnings are
not followed.