Teac TE-AV300, Installation & Connection Manual

Page: 16 / 32

15
FADER
Support 10 levels for each front and rear channel. Default is front
equal to rear.
EQ DSP OFF FLAT → CLASSICS → POP → ROCK → DSP OFF
2
）
Picture Menu
RED Adjust level of red color. Support 50 levels. Default level is 25.
GREEN Adjust level of green color. Support 50 levels. Default level is 25
BLUE Adjust level of blue color. Support 50 levels. Default level is 25.
BRIGHTNESS
Adjust level of screen brightness. Support 50 levels. Default level
is 25
CONTRAST
Adjust level of screen contrast. Support 50 levels. Default level is
25.
SHARPNESS
Adjust level of screen sharpness. Support 15 levels. Default level
is 10
SCREEN Adjust screen size: 16:9 → 4:3 → FULL
COLOR
RESET Resume color default status. (Select YES or NO, and press the
ENTER button to confirm “YES”)
3) Dual Menu
DUAL Set DUAL zone function ON or OFF.
DUAL KEY
When DUAL zone function ON, Set KEY Current or DVD mode.
In the Current mode ,the key control the front mode.
In the DVD mode ,the key control the rear mode(DVD mode).
4) RDS Setup Menu
TA ALARM → SEEK
PI MUTE
→
SOUND
RETUNE SHORT
→
LONG
MASK DPI → ALL
EON TA DX
→
LOCAL
REG OFF
→
ON
TA VOL Support 50 levels .Default level is 0.
5) Expert Menu
DX Set search radio station by DX or LOCAL mode. DX → LOCAL
STEREO Set radio audio at STEREO or MONO mode, STEREO → MONO
BEEP Set press keys‘ sound. 2ND → ALL → OFF